Black Box IC108A Guía de usuario descargar pdf (Pagina 15)

Advant

Smart Device (HART

) Interface User’s Guide

Section 2.2.1 Connecting to an Advant Controller 410 Subsystem

3BUR 001 085R0001 REV A 2-3

2.2.1.1 CI532V02, MVI for ModbusB(inary)

The CI532V02 MVI module (used for the smart device interface) shown in Figure 2-1 contains

two 9-pin male connectors. The pin designations for the connectors are listed in Table 2-5. The

SHIMs (or RS-232/485 converters) are connected to the CI532V02 MVI module via RS-232

serial cables with a 9-pin connector.

The CI532V02 MVI Module does not have any user jumper that need to be set.

Figure 2-1. CI532V02 MVI Module

Table 2-5. Pin Designation for Channel 1 and 2, Connector X4 and X5

Pin Name Description

1 DCD Data Carrier Detect

2 RD Receive Data

3 TD Transmit Data

4 DTR Data Terminal Ready

5 GND Ground

6 DSR Data Set Ready

7 RTS Request To Send

8 CTS Clear To Send

9 RI Ring Indicator

CHANNEL 1 (X4)

CHANNEL 2 (X5)

RUN-LED

FAULT-LED

532

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 117 118

Sin comentarios

Black Box IC108A Guía de usuario Pagina 15