search

Black Box AC2000A Especificaciones Pagina 10

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 45
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 9
10
2.
If the continuity is infinity, then replace that
hopper.
VALIDATOR INTERFACES
18 PIN INTERFACE CONNECTOR DETAILS
PLUG KEY
Interfacing the Mars 2501/2511 Series with the ValiChanger
8-Position Switch
1off
2on
3off
4on
5off
6on
7off
8off
No change is required to the 18-pin connector..
Ensure the black & yellow wires go to a wire nut and the green &
white go to the other wire nut
Interfacing the Mars 2601/2611 Series with the ValiChanger
8-Position Switch
1on
2on
3on
4on
5off
6on
7off
8off
The 18-pin connector is not required.
Interfacing the Mars AL-4 or AL-4 Plus Series with the
ValiChanger
8-Position Switch 4-Position Switch
1 on 1 off
2off 2off
3 on 3 off
4 on 4 off
5on
6off
7off
8on
The 18-pin connector is not required.
Interfacing the Maka NB-10 with the ValiChanger
To interface the Maka NB-10 validator with the ValiChanger
the following settings should be used for the “$1 = one
pulse” configuration. See the validator manual for full
details. The 18-pin interface connector should not be used.
Interfacing the Maka NB/NBE-20 with the ValiChanger
To interface the Maka NB/NBE-20 validator with the
ValiChanger the following settings should be used for the
“$1 = one pulse” configuration. See the validator manual for
full details. The DipSwitch settings should be:
6-Position Switch
1on
2on
3off
4off
5off
6off
The 18-pin interface connector supplied with the
ValiChanger should have pins 3, 4, 14, 15 & 18 connected
and pins 7,9,12 connected.
Interfacing the CoinCo BA30SA with the ValiChanger
Connect wires 4 & 12 (Black & Red) to gather on the 18-pin
connector to enable the Validator.
CoinCo MAGPRO Series Flash Codes
Flash codes 1-18 may appear during normal servicing of the
BA30. If more than one error or condition exists, the lower
number flash code will appear until its respective error or
condition is corrected. The left and right sensors referenced
below are given viewing the BA30 from the front.
# of Flashes Description of Flash Codes
1 Bill box full
2N/A
3 Check bill path
4 All bill accept switches are off
5 Bill jam or sensor error
6 Stacker motor/home sensor
7 Transport motor/encoder sensor
8 N/A
9 EPROM Has Failed
10 EPROM Has Failed
11 Center Optic Failed
12 Right Optic Failed
13 Left Optic Failed
14 Bill Position Sensor Error
15 Right Bill Position Sensor Error
16 Left Bill Position Sensor Error
17 Lower Anti-Stringing Armature out of place
18 Upper Anti-Stringing Armature out of place
Pin #1
Pin #9
Pin #18
Pin #10
Vista de pagina 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 44 45

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para No Black Box AC2000A
No Black Box LB510A-R2 Especificaciones     (12 paginas)
No Black Box IC515C Manual de usuario   (20 paginas)
No Black Box LR0301A-KIT Especificaciones    (16 paginas)
No Black Box 39004 Manual de usuario   (8 paginas)
No Black Box MT1000A-13-R3 Especificaciones   (78 paginas)
No Black Box AC650A-2-UK Manual de usuario   (9 paginas)
No Black Box LB1351A Manual de usuario   (14 paginas)
No Black Box AC328A-R4 Manual de usuario    (23 paginas)
No Black Box Local Mux-6 Especificaciones    (26 paginas)
No Black Box RS-530 Especificaciones    (17 paginas)
No Black Box Local Mux-6 Especificaciones    (27 paginas)
No Black Box Local Mux-6 Especificaciones   (44 paginas)
  • Jscar Xilinx Ma Labs My machine Zycoo
  • Remington Condensadores de ajuste y de cortar el pelo Husqvarna Juguetes y accesorios Ednet Bancos De La Energía Premier Protección Contra Incendios Pentax Flashes de las cámaras
  • Gemini CDM-3610 Pioneer PDP-502MXE AEG BE3002401M Retsch RM 200 Ld-systems VA 8
  • Sony BDP-S770 Manual de usuario LG GS155 Manual de usuario Asus MW201U Manual de servicio Philips PD7042/12 Manual de usuario Tecumseh AEA2380ZXA Dibujos y esquemas