Black Box KV150A-R2 Manual de usuario Pagina 116

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 160
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 115
CHAPTER 10: Using Management and Serial Control Cards
115
10. Using Management and Serial
Control Cards
The ServSwitch Multi Management Card (KV1608C-R2) and Serial Control Card (KV1609C) add advanced
serial-control features to the ServSwitch Multi. For an introduction to these Cards and for instructions on how
to install them and their associated cables and equipment, see Chapter 5.
10.1 Addressing Terminals on the Serial Control Card
Since each Serial Control Card has four ports, channel addressing (for port-selection purposes) requires more
than just a chassis number and slot letter. You must also designate which port on the Serial Control Card the
terminal is attached to. Ports are numbered from top to bottom as shown in Figure 10-1.
Figure 10-1. Port addresses on a Serial Control Card.
For example, the terminal attached to the second port on the Serial Control Card in slot D of chassis 15 would
be addressed “l5D2.”
Port 1
Port 2
Port 3
Port 4
Vista de pagina 115
1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 159 160

Comentarios a estos manuales

Sin comentarios