Black Box LWN600CM-1 Guía de usuario descargar pdf (Pagina 42)

724-746-5500 | blackbox.com

Page 42

724-746-5500 | blackbox.com

Chapter 3: The SmartPath AP (LWN602HA) Overview

CONSOLE

8 1

Figure 3-6. View of the console

port on the SmartPath AP

(LWN602HA).

Table 3-5. Console port pin assignments.

Pin Signal Direction

1 RTS (Request to Send) Output, unused

2 DTR (Data Terminal Ready) Output, unused

3 TXD (Transmitted Data) Output

4 Ground Ground

5 Ground Ground

6 RXD (Received Data) Input

7 DSR (Data Set Ready) Input, unused

8 CTS (Clear to Send) Input, unused

To make a serial connection between your management system and the SmartPath AP, you can use the console cable that is

available as an extra accessory. Insert the RJ-45 connector into the SmartPath AP console port and attach the DB9 connector to

the serial (or COM) port on your management system. The management system must have a VT100 terminal emulation program,

such as Tera Term Pro (a free terminal emulator) or Hilgraeve Hyperterminal (provided with Windows operating systems). If you

want to make your own serial cable and adapter, refer to Figure 3-7 and Table 3-6.

Rollover Cable with

RJ-45 Connectors

RJ-45-to-Female DB-9 Adapter

Console Port

COM Port

(on Back Panel)

CONSOLE

Management System

SmartPath AP

Management System

Figure 3-7. Wiring details for making a serial cable with an RJ-45-to-female DB9 adapter.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 191 192

Sin comentarios

Black Box LWN600CM-1 Guía de usuario Pagina 42