Black Box LWN600CM-1 Guía de usuario descargar pdf (Pagina 150)

724-746-5500 | blackbox.com

Page 150

724-746-5500 | blackbox.com

Chapter 10: SmartPath Operating System (OS)

qos { classifier-map | classifier-profile | marker-map | marker-profile | policy } …

• User profiles

user-profile string …

• SSIDs

ssid string …

• AAA (authentication, authorization, and accounting) settings for IEEE 802.1X authentication

aaa radius-server …

Although the configuration of most SmartPathOS features involves one or more related commands, to define and apply a QoS

policy to a group of users, you must configure several different but related features: a QoS policy, a user profile, and—if you do

not authenticate users with a RADIUS server—an SSID that references the user profile, and an interface to which you assign the

SSID. The configuration steps are shown in Figure 10-2.

user-profile string qos-policy string

vlan-id number attribute number

User accounts are stored

on the RADIUS Server.

Returned Attributes

• Tunnel Type = GRE (value = 10)

• Tunnel Medium Type = IPv4 (value = 1)

• Tunnel Private Group ID = user_profile_number

First, configure a QoS policy that you want to apply

to wireless traffic from a group of users.

The SmartPath AP applies the QoS policy to all

wireless clients that associate with the SSID.

ssid string

ssid string default-

user-profile-attr number

The attributes indicate which user profile to apply to the user,

and the profile in turn indicates which QoS policy to apply.

If you use a RADIUS server, configure

it to return attributes for the realm to

which the wireless users belong. After

authenticating a user, the server

returns these attributes with the

ccess-Accept message. The

attributes indicate which

user profile to apply to the

user, and the profile in turn

indicates the QoS policy to

apply.

qos policy string ...

interface interface ssid string

Second, configure a user profile that references the

QoS policy you just configured.

Assign the SSID to an interface.

RADIUS

Server?

NoYes

The next step depends on whether you use

a RADIUS server to authenticate users.

If you do not use a RADIUS server, create

an SSID that specifies the user profile

attribute as its default user profile.

The SmartPath AP applies the QoS policy to all

wireless clients that associate with the SSID.

Figure 10-2. Steps for configuring and applying QoS.

10.3 SmartPathOS Configuration File Types

SmartPathOS supports several types of configuration files: running, current, backup, bootstrap, default, and failed.

The running configuration (config) is the configuration that is actively running in DRAM. During the bootup process, a SmartPath

AP loads the running config from one of up to four config files stored in flash memory:

• current: a flash file containing a combination of default and admin-defined settings. During the bootup process, this is the first

config that the SmartPath AP attempts to load as the running config. This is also the file to which you typically save commands

from the running config (you can also save them to the bootstrap config). See Figure 10-3.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 191 192

Comentarios a estos manuales

Sin comentarios

Black Box LWN600CM-1 Guía de usuario Pagina 150

Comentarios a estos manuales