Black Box LWN600CM-1 Guía de usuario Pagina 43

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 192
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 42
724-746-5500 | blackbox.com
724-746-5500 | blackbox.com
Page 43
Chapter 3: The SmartPath AP (LWN602HA) Overview
Table 3-6. Wiring details for making a serial cable with an RJ-45-to-female DB9 adapter.
Console Port
(LWN602HA) RJ-45-to-RJ-45 Rollover Cable RJ-45-to-Female DB9 Adapter Management System
Signal RJ-45 Pin RJ-45 Pin RJ-45 Pin DB9 Pin Signal
RTS (Request to Send) 1 8 1 8 CTS (unused)
DTR (Data Terminal Ready) 2 7 2 6 DSR (unused)
TXD (Transmitted Data) 3 6 3 2 RXD
Ground 4 5 4 5 Ground
Ground 5 4 5 1 Ground
RXD (Received Data) 6 3 6 3 TXD
DSR (Data Set Ready) 7 2 7 4 DTR (unused)
CTS (Clear to Send) 8 1 8 7 RTS (unused)
9 RI (Ring Indicator, unused)
3.3 Status LEDs
The five status LEDs on the top of the SmartPath AP indicate various states of activity through their color (dark, green, amber, and
red) and illumination patterns (steady glow or pulsing).
Power
Dark: No power
Steady green: Powered on and the firmware is running normally
Pulsing green: Firmware is booting up
Steady amber: Firmware is being updated
Pulsing amber: Alarm indicating a firmware issue has occurred
Steady red: Alarm indicating a hardware issue has occurred
ETH0 and ETH1
Dark: Ethernet link is down or disabled
Steady green: 1000-Mbps Ethernet link is up but inactive
Pulsing green: 1000-Mbps Ethernet link is up and active
Steady amber: 10-/100-Mbps Ethernet link is up but inactive
Pulsing amber: 10-/100-Mbps Ethernet link is up and active
WIFI0 and WIFI1
Dark: Wireless interface is disabled
Steady green: Wireless interface is in access mode but inactive
Pulsing green: Wireless interface is in access mode and active
Steady amber: Wireless interface is in backhaul mode but inactive
Pulsing amber: Wireless interface is in backhaul mode and is connected with other cluster members
Alternating green and amber: Wireless interface is in backhaul mode and is searching for other cluster members
Vista de pagina 42
1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 191 192

Comentarios a estos manuales

Sin comentarios