Black Box ServSwitch ACU2222A-R2 Especificaciones Pagina 32
- Pagina / 132
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
31
CHAPTER 3: Installation and Preconfiguration
3.3.2 SETTING AND
INSTALLING CARDS
You can install Port Cards in any vacant Port-Card slot in the ServSwitch Affinity at
any time. You can also install an Expansion Card (or, on 4-User models, swap in an
Expansion Card for a Terminator Card)in order to prepare the Affinity to be
daisychained. (You must install Expansion Cards in 8- and 16-User models—they won’t
work otherwise.) Depending on the topology of your daisychained system—and, in
8- and 16-User systems, on the numbering of your user ports—you might need to
set the Expansion Card’s jumpers before you do this. For directions, see Appendix E.
3.3.3 RACKMOUNTING
(OPTIONAL)
If you want to mount the Affinity in a rack, you will need a ServSwitch Affinity
Rackmounting Kit. The product code for a 19", 23", or 24" kit is RMK19A139,
RMK23A139, or RMK24A139 respectively if your Affinity is a KV139 model, or
RMK19A, RMK23A, or RMK24A respectively if your Affinity is any other model. See
Appendix G for more information.
3.3.4 C
ONNECTING THE MONITORS, KEYBOARDS, AND MICE
User Cables (also called Monitor/Keyboard/Mouse [“MKM”] Adapter Cables) run
from each user’s monitor, keyboard, and mouse to the ServSwitch Affinity. Because
various styles of electrical connectors are used by different classes of equipment, we
supply this cable in various styles to match (see Appendix B). This cable also comes
in the different lengths supported by different applications (see Section 3.2.3,
Appendix B, and the Caution notice in Section 3.3.1.).
CAUTION!
Make very sure that the monitor, keyboard, and mouse you plan to use
can meet the demands of your application—see Section 3.2. Also, note
that the ServSwitch Affinity doesn’t support most keyboard-line dongles.
1. After you verify that the Affinity is turned OFF, plug the DB25 male connector
of the first User Cable into the one of the KVM ports on the Affinity’s rear
panel (preferably the lowest-numbered one—refer to Figures 2-2 and 2-3 in
Section 2.3). Use the other (consecutively higher-numbered) KVM ports for
the rest of the User Cables.
2. If your common equipment is IBM compatible, plug the cables from your
shared
monitor, keyboard, and mouse into the corresponding connectors on
the other
ends of the User Cable. If your common equipment is Sun compatible,
plug the mouse cable into the keyboard, and plug the monitor and keyboard
cables into the corresponding connectors on the other ends of the User Cable.
- Customer Support Information: 1
- Welcome to the ServSwitch 2
- FCC/IC STATEMENTS 4
- NOM STATEMENT 6
- ELECTRICAL SAFETY STATEMENT 6
- INSTRUCCIONES DE SEGURIDAD 6
- Contents 8
- TABLE OF CONTENTS 10
- Contents (continued) 11
- 1. Specifications 12
- CHAPTER 1: Specifications 14
- 2. Introduction 16
- 2.2 Features 17
- CHAPTER 2: Introduction 18
- 2.4 Cable Requirements 23
- 2.5 Equipment Requirements 23
- 3.1 Quick Setup Guide 24
- OUSE AND 25
- LACEMENT 31
- ETTING AND 32
- NSTALLING CARDS 32
- ACKMOUNTING 32
- PTIONAL) 32
- ONNECTING 33
- XPANSION 37
- UMBERING 38
- OPOLOGIES 41
- 3.5 The Power-Up Procedure 49
- NITIALLY 56
- ONFIGURING A 56
- ONFIGURING 57
- AISYCHAINED 57
- 4. Full Configuration 59
- CHAPTER 4: Full Configuration 60
- 4.1 Using the Menu 60
- 4.2 Configuring the System 62
- PPEARANCE 64
- 4.3 Configuring Computers 66
- 4.4 Configuring User Stations 70
- 4.6 Configuring User Profiles 73
- 4.7 Configuring Groups 76
- 4.8 The Status Page 78
- 5. On-Screen Functions 80
- Same-Slot 80
- Users, and Connection Modes 80
- ONNECTION 81
- UCCESSFUL 81
- ISCONNECT 83
- Optional* 86
- 5.4 Connection Modes 87
- 6. Keyboard Commands 89
- CHAPTER 6: Keyboard Commands 90
- 6.9 Log Out: [Ctrl] L 93
- 6.10 Disconnect: [Ctrl] Q 93
- 6.15 Start Scan: [Ctrl] S 95
- 6.16 End Scan: [Ctrl] X 96
- SERVSWITCH™ AFFINITY 101
- 8. Using the CPU Ports as 105
- Serial Ports 105
- UNIX computer 106
- 9. Troubleshooting 107
- CHAPTER 9: Troubleshooting 108
- 9.3 Calling Black Box 113
- 9.4 Shipping and Packaging 113
- Appendix C: Pinout of the 119
- Dedicated Serial Ports 119
- ServSwitch Affinity 121
- JUMPER OFF - RING 123
- JUMPER ON - BUS 123
- CAUTION! 127
- Appendix G: 130
- Rackmounting the Affinity 130
Relacionado con productos y manuales para Los Conmutadores Kvm Black Box ServSwitch ACU2222A-R2
(19 paginas)
Los Conmutadores Kvm Black Box KV1402A Guía de usuario
(114 paginas)
(114 paginas)
Yamaha RAPTOR 700 manuals
Owner’s manuals and user’s guides for DVD players Yamaha RAPTOR 700.
We providing pdf manuals Yamaha RAPTOR 700 for download free by document types:
Comentarios a estos manuales