Black Box ServSwitch ACU2222A-R2 Especificaciones descargar pdf (Pagina 122)

121

APPENDIX E: Installing Cards in the ServSwitch Affinity

E.2 Installing or Swapping In a Terminator Card (4-User Chassis Only)

If, prior to this, someone has taken the formerly installed card out of the top slot of

a 4-User model of the ServSwitch Affinity and left nothing in its place—which

should never be done, because it leaves the Affinity totally disabled—do this as your

first step: If there’s a blank plate over the slot, unscrew and remove—but don’t

discard—the plate. If instead you are swapping the Terminator Card for an

Expansion Card currently installed in the slot, your first step should be to unscrew

the Expansion Card and gently remove it from the slot.

Now, in either case, proceed as follows: Carefully push the Terminator Card into

the now-vacant slot, as shown in Figure E-2. (The Terminator Card must be

installed in this top slot, not any of the other four slots.) Once the Terminator

Card is firmly seated, replace this slot’s blank plate. (If you lose the plate, you’ll

need to order a new one; the product code for just the plate is KV1300BP.)

Figure E-2. Installing a Terminator Card.

1 2 ... 117 118 119 120 121 122 123 124 125 126 127 ... 131 132

Sin comentarios

Black Box ServSwitch ACU2222A-R2 Especificaciones Pagina 122