Black Box LES1204A-R2 Manual de usuario descargar pdf (Pagina 31)

Remote Console Manager

724-746-5500 l www.blackbox.com

 Select Serial & Network: Serial Port and you will see the current labels, modes, logging levels, and RS-232

protocol options that are currently set up for each serial port.

 By default, each serial port is set in Console Server mode. To reconfigure the port, click Edit.

 When you have reconfigured the common settings (Chapter 4.1.1) and the mode (Chapters 4.1.2 –4.1.6) for each

port, you can set up any remote syslog (Chapter 4.1.7), then click Apply.

Note If you want to set the same protocol options for multiple serial ports at once, click Edit Multiple Ports and select

which ports you want to configure as a group.

 If the console server has been configured with distributed Nagios monitoring enabled, then you will also be

presented with Nagios Settings options to enable nominated services on the Host to be monitored (refer Chapter

10—Nagios Integration).

4.1.1 Common Settings

There are a number of common settings that you can set for each serial port. These are independent of the mode in which

the port is being used. Set these serial port parameters to match the serial port parameters on the device you attach to

that port.

 Specify a label for the port.

 Select the appropriate Baud Rate, Parity, Data Bits, Stop Bits, and Flow Control for each port. (Note: The RS-

485/RS-422 option is not relevant for console servers.)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 234 235

Sin comentarios

Black Box LES1204A-R2 Manual de usuario Pagina 31