Black Box LES1204A-R2 Manual de usuario descargar pdf (Pagina 175)

Remote Console Manager

_____________________________________________________________________

724-746-5500 | blackbox.com 175

Log rate 240 seconds

Run shutdown script Enabled

# config -s config.ups.remotes.remote1.name=oldUPS

# config -s "config.ups.remotes.remote1.description=UPS in room 2"

# config -s config.ups.remotes.remote1.address=192.168.50.50

# config -d config.ups.remotes.remote1.log.enabled

# config -s config.ups.remotes.remote1.log.interval=240

# config -s config.ups.remotes.remote1.script.enabled=on

# config -s config.ups.remotes.total=1

The following command will synchronize the live system with the new configuration:

# config -a

14.10 RPC Connections

You can add an RPC connection from the command line. We do not recommend that you do this because of dependency

issues.

However FYI before adding an RPC the Management Console GUI code makes sure that at least one port has been

configured to run in 'device mode', and that the device is set to 'rpc'.

To add an RPC with the following values:

RPC type APC 7900

Connected via Port 2

UPS name MyRPC

Description RPC in room 5

SNMP community v1 or v2c

Logging Enabled

Log interval 600 second

Number of power outlets 4 (depends on the type/model of the RPC)

# config -s config.ports.port2.power.type=APC 7900

# config -s config.ports.port2.power.name=MyRPC

# config -s "config.ports.port2.power.description=RPC in room 5"

# config -s config.ports.port2.power.username=rpclogin

# config -s config.ports.port2.power.password=secret

# config -s config.ports.port2.power.snmp.community=v1

# config -s config.ports.port2.power.log.enabled=on

# config -s config.ports.port2.power.log.interval=600

# config -s config.ports.port2.power.outlets=4

The following five commands are used by the Management Console to add the RPC to “Managed Devices”:

# config -s config.devices.device3.connections.connection1.name=myRPC

# config -s "config.devices.device3.connections.connection1.type=RPC Unit"

# config -s config.devices.device3.name=myRPC

# config -s "config.devices.device3.description=RPC in room 5"

# config -s config.devices.total=3

The following command will synchronize the live system with the new configuration:

# config -a

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 234 235

Comentarios a estos manuales

Sin comentarios

Black Box LES1204A-R2 Manual de usuario Pagina 175

Comentarios a estos manuales

Relacionado con productos y manuales para Servidores De Consola Black Box LES1204A-R2