Black Box WAP-300BGN Especificaciones descargar pdf (Pagina 35)

724-746-5500 | blackbox.com

Page 34

11N 2T2R Wireless Access Point

Table 3-11. Enable WPS options.

Option Description

Enable WPS Check this box to enable or disable WPS function.

Wi-Fi Protected All information related to WPS will be displayed here. It’s helpful when you’re setting up

Setup Information connections by WPS.

WPS Status: Displays WPS status. If this access point’s data encryption settings have never been

set, an unConfigured message will be displayed here. (see Section 3.7 for detailed information).

If data encryption settings have been set before, a Configured message will be displayed here.

Self PinCode: This is the access point’s WPS PIN code. Use it when you need to build wireless

connection by WPS with other WPS-enabled wireless devices.

SSID: Displays the access point’s SSID (ESSID).

Authentication Mode: The access point’s wireless security authentication mode will be dis-

played here. If you don’t enable the access point’s security function before WPS is activated,

the access point will auto set the security to WPA (AES) and generate a set of passphrase keys

for WPS connection.

Passphrase Key: Displays the WPA passphrase. All characters will be replaced by asterisks for

security. If encryption is not set on this access point, nothing will be displayed here.

Config Mode There are Registrar and Enrollee modes for the WPS connection. When Registrar is enabled,

the wireless clients will follow the access point’s wireless settings for WPS connection. When

Enrollee mode is enabled, the access point will follow the wireless settings of wireless client for

WPS connection.

Start PBC Click on the Start PBC button to start Push-Button style WPS setup procedure. This access

point will wait for WPS requests from wireless clients for 2 minutes. The WLAN LED on the

access point will be steady on for 2 minutes when this access point is waiting for incoming

WPS request.

Start PIN Input the PIN code of the wireless client you want to connect, and click on the Start PIN but-

ton. The WLAN LED on the access point will be steady on when this access point is waiting for

an incoming WPS request.

NOTE: When you’re using PBC type WPS setup, press the wireless client’s PBC button (hard-

ware or software) within 120 seconds. If you don’t press the wireless client’s PBC button

within this timeframe, press it again.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 58 59

Sin comentarios

Black Box WAP-300BGN Especificaciones Pagina 35