Black Box WAP-300BGN Especificaciones descargar pdf (Pagina 33)

724-746-5500 | blackbox.com

Page 32

11N 2T2R Wireless Access Point

Table 3-10. Universal repeater options.

Option Description

Band Select the wireless band you want to use. Selecting different band settings enables you to

allow or deny the wireless client of a certain band.

If you select 2.4GHz (B), 2.4GHz (N), or 2.4GHz (G), only wireless clients using the wireless

band you select (802.11b, 802.11 Draft-N, or 802.11g) will be able to connect to this access

point.

If you select 2.4GHz (B+G), then only wireless clients using the 802.11b and 802.11g band will

be able to connect to this access point.

If you want to allow 802.11b, 802.11g, and 802.11 Draft-N clients to connect to this access

point, select 2.4GHz (B+G+N).

MAIN SSID Please input the ESSID (the name used to identify this wireless access point) here. You can

input up to 32 alphanumerical characters

NOTE: ESSID IS CASE SENSITIVE.

Multiple ESSID The access point supports multiple SSID functions; up to four SSIDs can be set. If you want to

configure additional SSIDs, click on this button.

Channel Number Select a channel number you want to use. The channel number must be the same as another

wireless access point you want to connect.

Associated Clients Click on the Show Active Clients button. A new popup window will appear that contains the

information about all wireless clients connected to this access point. You can click on the

Refresh button in the popup window to keep information up to date.

Root AP SSID In Universal Repeater mode, this device acts as a station to connect to a root AP. Assign the

root AP’s SSID here or click on the Select Site Survey button to choose a Root AP.

Select Site Survey Click on the Select Site Survey button, and a Wireless Site Survey Table pops up. It lists all avail-

able access points nearby. Select one access point in the table and the access point will join the

wireless LAN through this access point.

After you finish the settings, click on the Apply button, and the following message will be displayed:

Figure 3-25. Settings saved successfully prompt.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 58 59

Sin comentarios

Black Box WAP-300BGN Especificaciones Pagina 33