Black Box LBG1000A-R2 Manual de usuario descargar pdf (Pagina 16)

Menu-Driven Console Management

The switch provides a menu-driven console interface for configuration purposes. The switch can be configured

either locally through its RS-232 port or remotely via a Telnet session. For the later, you must specify an IP address

for the switch first.

This chapter describes how to configure the switch using its menu-driven console.

Logging on to the switch

At the screen prompt

Password:

Enter the console interface factory default console name admin.

PASSWORD

Enter the factory default password (no password, press <Enter> directly). Or enter a user-defined password if you followed the

instructions later and changed the factory default password.

Factory Default Password: no password, press <Enter> directly.

<Note> Only one console and three telnet users can log on to the switch concurrently. However, it is not recommended that multiple

users modify the configuration at the same time.

* For initial IP settings, you must configure the switch through its

RS232 port.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 73 74

Sin comentarios

Black Box LBG1000A-R2 Manual de usuario Pagina 16