Black Box CSU/DSU Especificaciones Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 116
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
20
CSU/DSU MS DBU
in the CSU/DSU MS DBU). See Appendix A for the pin assignments of the control
port (for SLIP and Async PPP) and the Ethernet port.
P
OWER
U
P
The CSU/DSU MS DBU is provided with a captive 8-foot power cord, terminated
by a three-prong plug that connects to a grounded 115-VAC power receptacle.
CAUTION
Power to the DSU must be provided from a grounded 115-VAC, 60-Hz
receptacle.
2.2 Rear Panel
The rear panel contains two DTE connectors that provide primary-channel V.35 or
EIA-232. An 8-pin telco jack, a control port, a captive power cord, and a power
switch are also located on the rear panel. Pin assignments for these connectors are
listed in Appendix A. The CSU/DSU MS DBU rear panel is shown in Figure 2-1
with optional modules installed.
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 115 116

Comentarios a estos manuales

Sin comentarios