Black-box COMPACT T1 MT850A Manual de usuario descargar pdf (Pagina 166)

100

101

5-82 Compact T1 - Release 6.1

CLI Commands

set

set ipds0

Use the set ipds0 command to setup the DS0 management channel.

Note: the DS0 selected as the DS0 management channel can only reside on the Controller T1.

Syntax: set ipds0 {setting} [ds0-addr|ip-addr]

Example: set ipds0 assign a:1:24

The example sets the DS0 management channel to slot A (Controller), port 1,

channel 24.

{setting}

[ds0-addr|ip-addr]

In the form {slot:port:channel}.

assign Assign the DS0 as the IP management channel

delete Removes the IP over DS0 management channel (Default)

down Set the DS0 management channel down (Default)

ip address Set the DS0 management channel’s IP address and optional subnet mask

up Set the DS0 management channel up (enables)

slot A for the controller card

port Port number or range.

channel Channel number or ranges.

ip-addr Setup the DS0 management channel IP address and the optional subnet

mask, in the form of xxx.xxx.xxx.xxx, where xxx is between 0-255.

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 591 592

Comentarios a estos manuales

Sin comentarios

Black-box COMPACT T1 MT850A Manual de usuario Pagina 166

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Black-box COMPACT T1 MT850A