Black Box Multi-Function Line Driver Manual de instalación Pagina 7
- Pagina / 44
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
1-1
1. MOUNTING
1.1 Mounting Considerations
When selecting a mounting location for TZTBB, keep the following in mind:
• The temperature at the mounting location shall be between -15°C and +55°C (wire-
less LAN: 0°C and +55°C).
• The humidity at the mounting location shall be 93% or less at 40°C.
• Locate the unit away from exhaust pipes and ventilators.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal (comply with IEC 60945
Ed.4).
• Keep the unit away from electromagnetic field generating equipment such as mo-
tors and generators.
• For maintenance and checking purposes, leave sufficient space around the unit and
leave slack in cables. Minimum recommended space is shown in the outline draw-
ings.
• A magnetic compass will be affected if the equipment is placed too close to it. Ob-
serve the compass safe distances shown in the SAFETY INSTRUCTIONS to pre-
vent disturbance to the magnetic compass.
1.2 Processor Unit
The processor unit MPU-002 can be mounted on the tabletop or a bulkhead. Refer to
the outline drawing for mounting dimensions. For bulkhead mounting, be sure the unit
bottom is oriented downward.
Tabletop/ bulkhead mount
1. Decide the munting location for the unit.
2. Make four pilot holes for self-tapping screws in the mounting location.
3. Screw the self-tapping screws (φ6x20, 4 pcs.) into the pilot holes, leaving a clear-
ance of 5 mm.
4. Hang the unit on the screws.
5. Fasten all screws.
- Installation Manual 1
- Multi Function Display 1
- Black Box Type 1
- SAFETY INSTRUCTIONS 3
- SYSTEM CONFIGURATION 4
- EQUIPMENT LISTS 5
- 1. MOUNTING 7
- 1.3 Switch Box 8
- 2. WIRING 9
- 2.1.2 MULTI port 10
- 2.1.3 CAN bus port 11
- NMEA0183 equipment 12
- Audio OUT 13
- Video IN 1/2 13
- DVI-D OUT0 13
- Insert the gasket to the 14
- Peel off the seal from 15
- Fixing plate2 15
- Video input 16
- DVI-D (external monitor) 16
- USB port 16
- 2. WIRING 17
- Input PGN 18
- Output PGN 19
- NETWORK SOUNDER 20
- (For PSU-017) 21
- 3. SETTING UP THE EQUIPMENT 23
- About menu operations 24
- 3. SETTING UP THE EQUIPMENT 25
- UTC -06:00 26
- 3.2 Menu Initial Setup 27
- Menu Initial Setup 28
- Menu Initial Setup (Engine) 28
- Menu Initial Setup (Fuel) 29
- 3.3 How to Set up the Radar 30
- Range Range ring interval 32
- Range indications 32
- Zoom outZoom in 32
- Pinch action 32
- 3.4 How to Set up the Sounder 33
- 3.5 Wireless LAN Setting 34
- 4. HOW TO INSTALL THE HDD 35
- 4. HOW TO INSTALL THE HDD 36
- ＰＡＣＫＩＮＧ ＬＩＳＴ 37
- %(# 38
- %/$ 38
- %2# 39
- 25/Dec/2012 Y.NISHIYAMA 40
- 21/Dec/2012 Y.NISHIYAMA 41
- ;0+5*+;#/# 42
- 6;#/#5#-+ 43
- 43
- %% % 43
- *0 00177 24012* 44
Panasonic TX32LX80P manuels
Manuels d'utilisation et guides de l'utilisateur pour Audio Panasonic TX32LX80P.
Nous fournissons des manuels en pdf 2 Panasonic TX32LX80P à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comentarios a estos manuales