Black Box RS IC107AE-R3 Manual de usuario Pagina 11

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 20
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 10
10
RS-232RS-422/485 CONVERTER (DATA ONLY)
4. Installation
To install your RS-232RS-422/485 Converter (Data Only) system, take these
steps, making sure that the Converter and your devices are powered OFF:
1. Run an RS-232 cable from your RS-232 device to the Converter’s DB25 female
RS-232 port.
2. Run a 4-wire cable from your RS-422 device, or the nearest of your RS-485
devices, to the Converter’s 4-position RS-422/485 terminal block. Make sure
to connect the wires running from the device to the appropriate terminals on
the Converter:
Device Converter
TX + RXB
TX – RXA
RX + TXB
RX – TXA
3. Plug the Converter into AC power. It will begin operating immediately; it has
no ON/OFF switch.
4. Power up your devices.
Your Converter system should now be ready for continuous operation.
Vista de pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Comentarios a estos manuales

Sin comentarios