Black Box Network Hardware EncrypTight Enforcement Point (ETEP) Manual de usuario Pagina 46

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 74
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 45
ETEP Installation Guide 47
3 Initial Setup
This section includes the following topics:
Overview
Logging In Through a Serial Link
Configuring the Management Port
Setting the Date and Time
Entering a Throughput License
Configuration Example
Managing the ETEP
Overview
The following steps are required for initial setup of the ETEP:
1 Log in through a serial link.
2 Configure the management port.
3 Set the date and time.
4 Enter the throughput license.
Logging In Through a Serial Link
Initial setup is performed through a serial link to the RS-232 port. The initial setup commands are
available to the Admin and Ops users. The procedures and examples in this chapter assume that the
Admin user is performing the setup tasks.
Vista de pagina 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 73 74

Comentarios a estos manuales

Sin comentarios