Black Box MDS920C-10BT Manual de usuario descargar pdf (Pagina 20)

User Manual

4.4.2 Ethernet Setup submenu

Configuration Management->EtherNet Setup

1.[Speed]:Auto

2.[Duplex Mode]:Auto

3.[Disable Mac Filter]:No

4.IP Address>>192.168.5.105

5.Subnet Mask>>255.255.255.0

6.Gateway Address>>192.168.5.1

8.NMS IP Address>>192.168.5.32

9.Read Community>>

10.Write Community>>

11.Trap Community>>

12.[Enable TFTP Server]:No

13.[DSL Reboot]:No

14.[Time before Reboot]:30min

Select item number or ESC to Upper level menu>>

• In the Speed menu, you can setup the Ethernet speed to the following states:

10M, 100M or Auto

• In the Duplex Mode menu you can setup the Ethernet ports to the following states:

Half, Full or Auto

• In the IP Address-, Subnet Mask- and Gateway Address menu you, can setup the desired

IP settings

• In the NMS IP Address menu you can setup the IP receiver address for the SNMP traps

(the Network Manager).

• In the Read / Write / Trap Community menu you can setup the desired SNMP community

address names (text).

• In the “Enable TFTP Server” menu you can enable / disable the software download feature

• In the “DSL Reboot” menu you can enable / disable the DSL line restart feature. This

feature will be activated in case of lacking data streams between two modems.

• In the “Time before Reboot” menu you can setup the wait time before the units reboots in

case of lacking data streams.

Version: 1.9 Page. 20 of 29

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 28 29

Sin comentarios

Black Box MDS920C-10BT Manual de usuario Pagina 20