Black Box LR1530A-EU-R3 Manual de usuario descargar pdf (Pagina 97)

Software Upgrades

APPENDIX D

SOFTWARE UPGRADES

Procedures for performing a Console ZMODEM Flash

Load to upgrade the operating software of the router:

1) Save the current configuration of the router (Main menu: option

6).

2) Execute the Console (ZMODEM) command from the Load

FLASH Set-Up menu.

3) Confirmation is required. Enter “yes” to proceed.

4) After the router restarts, the router will be in receive ZMODEM

mode. The router will display the following messages on the

console port:

System startup

Receiving ZMODEM ...

**B0100000023be50

5) Start the ZMODEM transfer and send the file “###.all” from the

Operational/BOOT Code directory on the CD-ROM.

6) Once the ZMODEM transfer is complete, the router will verify the

file “###.all” in memory, program and verify the FLASH, clear

the configuration to default values (except the password), and then

reset. A byte status message will be displayed on the console port

during the programming of the FLASH. After the reset, the remote

sites information will have to be re-entered, either from a saved

configuration file (recommended) or by manually reentering the

information for each site.

On the rare occasion that during the programming of the

FLASH something happens to the bridge/router (power hit or

hardware reset), causing the FLASH to become corrupted, the

bridge/router will restart in ZMODEM receive mode only. If

1 2 ... 92 93 94 95 96 97 98 99 100 101 102

Sin comentarios

Black Box LR1530A-EU-R3 Manual de usuario Pagina 97