Black Box LE3700A-R2 Especificaciones descargar pdf (Pagina 17)

ETHERNET PRINT SERVER

If a terminal is not attached to the serial port, you can still detect a boot

error (typically network-related) via the LEDs. If the OK and network

LEDs are blinking rapidly (2-3 times per second) in unison, a boot failure

occurred. Once the EPS boots and is running normally, the OK LED will

blink once every 2 seconds.

3. If all the tests pass successfully, but the code in the Flash-ROMs is corrupt,

the EPS will attempt to download new code from a network host. Both

the OK and Parallel LEDs will blink at the same time in this case. The

screen shown in Fig. 3-3 will print to the serial port.

Checking 2 sections from flash: invalid checksum

found.

Erasing flash....done.

Attempting TFTP boot....

Attempting NetWare boot.....

Attempting MOP boot....

Will wait 1 minute for next download attempt...

Fig. 3-3. Code in Flash ROMs is Corrupt.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 66 67

Sin comentarios

Black Box LE3700A-R2 Especificaciones Pagina 17