Black Box 5000 Series Guía de instalación descargar pdf (Pagina 19)

To Install

1. Units are shipped with a knock-out panel covering the sensor/serial ports. First, use an X-ACTO knife to slice off

2 of the 3 tabs in order to remove the knock-out panel.

2. Connect the Sensor Input Harness to the Sensor Port on the 5500 or 5200 device.

3. Verify installation by checking the LED behavior of the device (see page 23) and call Customer Care at

866.227.7323 and select Option 5.

4. Before securing the device under the dashboard, make sure you have recorded the appropriate information on

the Sensor Installation Card included with the Sensor Input Harness. Once all information is recorded, follow the

instructions detailed on the card to update your fleet on www.networkfleet.com.

Data Port

Sensor Port

Serial Port

Sensor Input Harness

(Blue & Purple)

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Sin comentarios

Black Box 5000 Series Guía de instalación Pagina 19