Black Box Wizard IP Plus ServSwitchTM Guía de usuario Pagina 24
- Pagina / 79
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
23
®
Placing Wizard IP Plus alongside the firewall
Wizard IP Plus is built from the ground-up to be secure. It employs a
sophisticated 128bit public/private key system that has been rigorously analysed
and found to be highly secure (a security white paper is available upon request).
Therefore, you can position the Wizard IP Plus alongside the firewall and control
hosts that are also IP connected within the local network.
IMPORTANT: If you make the Wizard IP Plus accessible from the public Internet
or from a modem, care should be taken to ensure that the maximum security
available is activated. You are strongly advised to enable encryption and use
a strong password. Security may be further improved by restricting client IP
addresses, using a non-standard port number for access or limiting remote
access to dial up connections only.
Ensuring sufficient security
The security capabilities offered by the Wizard IP Plus are only truly effective
when they are correctly used. An open or weak password or unencrypted link
can cause security loopholes and opportunities for potential intruders. For
network links in general and direct Internet connections in particular, you should
carefully consider and implement the following:
• Ensure that encryption is enabled.
By local configuration or by remote configuration.
• Ensure that you have selected secure passwords with at least 8 characters
and a mixture of upper and lower case and numeric characters.
By remote configuration.
• Reserve the admin password for administration use only and use a non-
admin user profile for day-to-day access.
• Use the latest Secure VNC viewer (this has more in-built security than is
available with the Java viewer). To download the viewer.
• Use non-standard port numbers.
• Restrict the range of IP addresses that are allowed to access the Wizard IP
Plus to only those that you will need to use. To restrict IP access.
• Do NOT Force VNC protocol 3.3. Remote configuration. Protocol 3.3 is a
legacy version that does not offer any encryption.
• Add a further level of inherent security by restricting access only via modem
or ISDN dialup.
• Ensure that the computer accessing the Wizard IP Plus is clean of viruses and
spyware and has up-to-date firewall and anti-virus software loaded that is
appropriately configured.
• Avoid accessing the Wizard IP Plus from public computers.
Security can be further improved by using the following suggestions:
• Use a KVM switch with On-Screen-Display driven security access and an auto-
logout (after inactivity) feature to provide a second level of security.
• Place the Wizard IP Plus behind a firewall and use port the numbers to route
the VNC network traffic to an internal IP address.
• Review the activity log from time to time to check for unauthorized use.
• Lock your server consoles after they have been used.
A security white paper that gives further details is available upon request from
Black Box.
Ports
In this configuration there should be no constraints on the port numbers
because the Wizard IP Plus will probably be the only device at that IP address.
Therefore, maintain the HTTP port as 80 and the VNC port as 5900.
Addressing
When the Wizard IP Plus is situated alongside the firewall, it will require a public
static IP address (i.e. one provided by your Internet service provider).
More addressing information:
Discover DHCP-allocated addresses
DNS addressing
- ServSwitch 1
- Wizard IP Plus 1
- Contents 2
- Further information 3
- Introduction 4
- BLACK BOX 5
- What’s in the box 6
- Installation 7
- Connections 8
- Host computer links: Video 9
- Host computer links: Audio 10
- 11
- 11
- 11
- IP network port 13
- Modem/ISDN port 14
- Power supply connection 14
- Power control port 15
- > > > 16
- Encryption settings 18
- Resetting the configuration 20
- Part 2 – Remote configuration 21
- Networking issues 22
- Power switching configuration 25
- Pxy=z\0D 25
- The KVMADMIN utility 26
- Performing a flash upgrade 27
- Operation 28
- Remote connections 29
- Local connection (continued) 29
- The menu bar 31
- When using the viewer window 31
- Host selection 32
- Configure 32
- Mouse pointers 32
- Access mode - shared/private 33
- Power control 33
- Auto calibrate 33
- Re-synchronise mouse 33
- Controls 34
- Viewer encryption settings 39
- Supported web browsers 39
- Unit configuration 42
- Network configuration 43
- Modem configuration 44
- Reset configuration 45
- Clear IP access control 46
- Colour/Encoding 47
- Identities 50
- Load / Save 50
- Encoding and colour level 52
- Security 52
- User accounts 54
- Advanced unit configuration 56
- Time & date configuration 57
- Setting IP access control 59
- Modem port 60
- Host configuration 61
- Hotkey sequences 62
- Port Direct 62
- Logging and status 63
- 192.168.142.154 64
- Security issues with ports 67
- Permissible key presses 69
- Creating macro sequences 69
- Safety information 71
- End user licence agreement 72
- Radio Frequency Energy 73
- Instrucciones de seguridad 75
Relacionado con productos y manuales para Los Conmutadores Kvm Black Box Wizard IP Plus ServSwitchTM
Los Conmutadores Kvm Black Box KV1402A Guía de usuario
(114 paginas)
(114 paginas)
© 2020, manymanuals.es. Todos los derechos reservados | 0.109 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales