Black Box Compact T1 MT850A Manual de usuario descargar pdf (Pagina 30)

26 Compact T1 - Release 6.1

Quick Start

Configuration

Establish a Static Channel Connection

Use the following commands to establish a static channel connection.

Set Up a ISDN BRI Service

Use the following commands to set up a ISDN BRI Service. See the set (bri) command

for details.

Command Description

set {slot:port:channel} type

{voice|data}

Set the channel type for the channel you want

to map. See set (ds0) command for details.

set {slot:port:channel} signal

{ls|gs|emw|emdw|emicpd|dpt}

Set the channel signaling option. See set (ds0)

command for details.

connect {slot:port}

{slot:port}

Connect the channels. See the connect (card-

trunk) (card-trunk) command for details.

Command Description

set {slot:port} up Put the ISDN line In-Service.

set {slot} mode

{lt3ds0|lt4to1tdm|nt3ds0}

Set the ISDN mode.

set {slot:port} crv {1-768} Set the Call Reference Value. Note: value

must be the same as the Access Navigator.

set {slot:port} threshold

{day|hour} {es|ses}

Set the threshold for the IDSN lines.

set {slot} pmsync

{adit|switch}

Set the source for performance monitoring

synchronization.

set {slot:port} autoactivate

{on|off}

Only used in 4 to 1 mode. Establishes the D

channel when the FDL link can not be used.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 41 42

Sin comentarios

Black Box Compact T1 MT850A Manual de usuario Pagina 30